Luer Locks & Adapters
Home » Products » Luer Locks & AdaptersThe Luer lock system of joining needles to syringes has been in use for generations. Growing from the original application of a metal fitting attached to a glass syringe, male Luer Lock adapters allow this connection system to be used in a myriad of applications. Vita Needle Company has proprietary technology which permits plated brass adapters to be produced far more economically than conventional, single point machining. Because the Luer system specifications are so demanding, very few producers without the generations of Vita's experience are willing to manufacture and stock these adapters. Vita's variety of stock brass and stainless steel, ANSI and ISO 594/1 and ISO 594/2 compliant Luer adapters and thread to thread industrial adapters supplements our ability to manufacture to custom specifications.
Hypodermic Luer Adapters and Luer Lock Hubs
Below is a listing of our standard luers and hubs. Our stock luers and luer lock hubs are plated brass unless a part number is listed in blue for 303 Stainless Steel or red for 316 Stainless Steel. Please be sure to specify your needs when placing an order and remember that we routinely produce custom luer adapters and hubs in numerous alloys. Actual and finished appearances may differ from photographs. Luers and hubs must be drilled to size to accept cannula, please advise your sales rep of the required diameter when ordering. Specifying your final drilled size will allow the proper nose hub to be selected by our sales staff for your application.
Luer Lock Hubs:
Please click on hub for larger image.
| VN401 |  |
Hub 1/8 NPT Ext. Thread (fits .012-.220 cannula) | VN411 |  |
1510 Luer Lock Hub (fits .012-.125 cannula) |
| VN402 |  |
Hub 1/4 NPT Ext. Thread (fits .012-.220 cannula) | VN412 |  |
1520 Luer Lock Hub (fits .020-.125 cannula) |
| VN403 |  |
1170 Luer Lock Hub (fits .008 - .220 cannula) | VN413 |  |
1530 1/4 -32 Ext. Threaded Hub (fits .050-.072 cannula) |
| VN404 |  |
1170T 10-32 Int. Threaded Luer Lock Hub (fits .008 - .065 cannula) | VN414 |  |
1535 Ext. Threaded Luer Lock Hub (fits .028-.065 cannula) |
| VN405 |  |
1180P 12-32 Int. Threaded Oiling Hub (fits .020-.083 cannula) | VN415 |  |
RT18HX Hex Hub with 1/4 -28 Ext. Thread (fits .025-.134 cannula) |
| VN406 |  |
1280E 1/4 -28 Int. Threaded Oiling Hub (fits .020-.083 cannula) | VN416 |  |
Alemite® Grease Fitting Style Hub (fits .028-.095 cannula) |
| VN407 |  |
1300 Luer Lock Hub (fits .008-.072 cannula) | VN417 |  |
Aluminum Luer Lock Hub (fits .032-.065 cannula) |
| VN408 |  |
1375 Luer Slip Hub (fits .012-.095 cannula) | VN418 |  |
Minimum Dead Volume Short Luer Lock Hub (fits .008-.220 cannula) |
| VN410 |  |
1400T 5/32 -40 Int. Threaded Luer Lock Hub (fits .012-.072 cannula) | VN419 |  |
5/16 -32 Ext. and 12-32 Int. Threaded Hub (fits .052-.125 cannula) |
| 1047 |  |
1047. Stylet Hub (for solid wire only). 1047A includes formed notch for alignment. |
Luer Lock Adapters:
Our stock luer adapters are plated brass unless a part number is listed in blue for 303 Stainless Steel or red for 316 Stainless Steel. Please be sure to specify your needs when placing an order and remember that we routinely produce custom adapters in numerous alloys / metals. Actual appearance may differ from photographs. Please click on adapter for larger image.
| VN503 |
 |
MLL TO SMALL 1 BARB (.150 Barb Diameter ref) |
| VN504 |
 |
MLL TO MEDIUM 1 BARB (.225 Barb Diameter ref) |
| VN505 VN521 VN529 |
 |
MLL TO LARGE 3 BARB (.310 Barb Diameter ref) |
| VN509 |
 |
MLL TO MLL |
| VN517 VN525 |
 |
MLL TO MLL |
| VN511 |
 |
MLL TO 10-32M THREAD |
| VN512 |
 |
MLL TO 1/4 NPT M (#V2) |
| VN513 |
 |
MLL TO 1/8 NPT M (#V1) |
| VN515 VN523 VN531 |
 |
MLL TO BLANK |
| VN519 VN527 |
 |
MLL TO 1/4 -28 M THREAD |
| VN533 |
 |
MLL TO 5/16 -28 M THREAD |
| VN534 |
 |
MLL TO 1/4 -28 M THREAD |
| VN535 |
 |
MLL TO 12-32 M THREAD |
| VN536 |
 |
MLL TO 5/16 -32 M THREAD |
| VN537 |
 |
MLL TO 10-40 M THREAD |
| VN538 |
 |
MLL TO 10-32 F THREAD |
| VN539 |
 |
MLL TO FLL |
| VN554 VN559 |
 |
SMALL 3 BARB WITH 1/4-32 THREAD PLUS NUT & WASHER [Bulkhead Fitting] TO MLL (.105 Barb Diameter ref) |
| VN650 |
 |
STOPCOCK with 12-32 F both sides (combine with any 12-32 M adapter on this page) |
| VN506 |
 |
FLL TO SMALL 1 BARB (.150 Barb Diameter ref) |
| VN507 |
 |
FLL TO MEDIUM 1 BARB (.225 Barb Diameter ref) |
| VN508 VN522 VN530 |
 |
FLL TO LARGE 3 BARB (.310 Barb Diameter ref) |
| VN510 |
 |
FLL TO FLL |
| VN518 VN526 |
 |
FLL TO FLL |
| VN514 |
 |
FLL TO 10-32 M THREAD |
| VN516 |
 |
FLL TO BLANK (1170 RN) |
| VN524 VN532 |
 |
FLL TO BLANK |
| VN520 VN528 |
 |
FLL TO 1/4 -28 M THREAD |
| VN540 |
 |
FLL TO 1/4 -28 M THREAD |
| VN541 |
 |
FLL TO 12-32 M THREAD |
| VN550 VN555 |
 |
SMALL 3 BARB WITH 1/4-32 THREAD PLUS NUT & WASHER [Bulkhead Fitting] TO FLL (.105 Barb Diameter ref) |
| VN551 VN556 |
 |
FLL TO SMALL 3 BARB (.150 Barb Diameter ref) |
| VN552 VN557 |
 |
FLL TO M6-1 THREAD WITH HEX |
| VN553 VN558 |
 |
1/4-32 EXT THREAD TO FLL WITH STOPCOCK |
See our custom RFQ page to request a quote on a custom Luer, Hub or Adapter. Our sales engineers will gladly work with you to produce the part you need!
Thread to XXX
Please click on Luer lock for larger image.
| VN542 |
 |
12-32 M THREAD TO 1/8 NPT M THREAD (MP 10) | VN547 |
 |
12-32 M THREAD TO LARGE 3 BARB | |
| VN543 |
 |
12-32 M THREAD TO 1/8 NPT F THREAD (FP 30) | VN548 |
 |
12-32 M THREAD TO MEDIUM 1 BARB | |
| VN544 |
 |
1/4-28 M THREAD TO 12-32 F THREAD (PE-50) | VN549 |
 |
12-32 M THREAD TO SMALL 1 BARB | |
| VN545 |
 |
1/8 NPT F TO 12-32 F THREAD | VN501 |
 |
1/4-28 M THREAD TO 1/8 NPT M (ME 20) | |
| VN546 |
 |
1/8 NPT F TO BLANK | VN502 |
 |
1/4-28 M THREAD TO 1/8 NPT F (FE40) |