Products & Services
CUSTOM IS VITA'S SPECIALTY! • F.D.A.
CHARTER REGISTERED
Click a link below for detailed information
• HYPODERMIC, FRACTIONAL & METRIC
TUBING
Medical Grade SS & Nickel, Hard Temper
(Stock), Various Alloys
• CUSTOM TUBING: SIZES / MATERIALS
/ TEMPERS
Copper & Brass available
• COMMERCIAL TUBING & PIPE
Up to 15" OD in SS, High Nickel Alloys & Aluminum
• STAINLESS STEEL MEDICAL WIRE
Stock .125" and all sizes below
• CUT & FABRICATED TUBULAR & WIRE
PARTS
2nd operation and finishing processes
available
• HYPODERMIC LUER NEEDLES & POINTED
CANNULA
Custom hollow / solid needle assemblies
• INDUSTRIAL, LUBRICATION AND INFLATING NEEDLES
• DISPOSABLE / DISPENSING
NEEDLES, SYRINGES & BOTTLES
Plus other dispensing equipment
• LUER ADAPTERS & FITTINGS
Brass / Chrome Plated and Stainless Steel
| TECHNOLOGIES & CAPABILITIES | ||
|---|---|---|
| •ABRASIVE | •ECM | •PROPRIETARY TECHNOLOGIES |
•BRAZE
|
•EDM - SINKER | •SOLDER |
| •CHEMICAL SURFACE TREATMENT | •EDM - WIRE | •SPIN |
| •CNC | •EPOXY | •STAKE |
| •CONVENTIONAL MILL & TURN | •GRIND | •SUPPORTED SHEAR
|
| •CRIMP | •HEAT TREAT | •SWAGE |
| •DRILL / REAM / BORE | •LASER | •WELD |
| •ECC / ECG | •MICROBLAST | |
| FORMING | SECOND OPERATION | ASSEMBLY | FINISHING |
| • CUT | • DEBUR | • ADHESIVE | • ANNEAL |
| • BEND | • BEVEL | • BRAZE | • BUFF |
| • BULGE / BEAD | • CHAMFER | • CRIMP | • ENGRAVE |
| • COIL | • FLANGE | • SOLDER | • ETCH |
| • COIN | • FLARE | • STAKE | • ELECTRO POLISH |
| • CORSET | • GRIND OD | • WELD | • GRIT/BEAD BLAST |
| • DIMPLE | • GRIND POINT | • HEAT TREAT | |
| • END CLOSURES | • GROOVE | • MARK | |
| - BULLET POINT | • HOLES | • MICROPOLISH | |
| - CONSISTENT WALL | • KNIFE EDGE | • PASSIVATE | |
| - ROUND | • KNURL | • TEFLON® COAT | |
| - SHARP | • LANCE | • TUMBLE | |
| - WELDED | • MIN. DEAD VOLUME | • ULTRASONIC | |
| • END REDUCTION | • NOTCH | CLEANING | |
| • EXPAND | • PUNCH | ||
| • FLATTEN | • SPECIAL MACHINING | ||
| • FLATTEN & PIERCE | • SLOT | ||
| - OFFSET / CENTER | • THREAD | ||
| • RADIUS OD / ID | • TURN | ||
| • SWAGE | • MILL | ||
| • TAPER | |||
| NOTE: MULTIPLE PROCESS OPTIONS ARE TYPICALLY AVAILABLE FOR APPLICATIONS. ALTERNATIVES WILL VARY BASED ON MATERIAL SIZE / TYPE, REQUIRED DELIVERY, QUANTITY, FINISHES AND TECHNICAL SPECIFICATIONS / TOLERANCES. VITA NEEDLE COMPANY REQUESTS YOUR PRIORITY GUIDANCE ON TIME, COST AND APPLICATION IN ORDER TO MAXIMIZE COST EFFECTIVENESS. | |||
© 2004 Vita Needle Company, Inc. • 919 Great Plain Avenue • Needham, MA 02492
Phone: 781-444-1780 • Fax 781-444-3956 • Email: sales@vitaneedle.com
