Luers and Hubs - Adapters - Vita Needle Company

Needles, Luers & Adapters > Luers, Hubs & Adapters

The Luer system of joining needles to syringes has been in use for generations. Growing from the original application of a metal fitting attached to a glass syringe, male Luer Lock adapters allow this connection system to be used in a myriad of applications. Vita Needle Company has proprietary technology which permits chrome plated brass adapters to be produced far more economically than conventional, single point machining. Because the Luer system specifications are so demanding, very few producers without the generations of Vita's experience are willing to manufacture and stock these adapters. Vita's variety of stock brass and stainless steel, ANSI compliant Luer adapters and thread to thread industrial adapters supplements our ability to manufacture to custom specifications.

Luers and Hubs:
Below is a listing of our standard luers and hubs. Our stock luers and hubs are Brass and Chrome Plated unless a part number is listed in blue for 303 Stainless Steel or red for 316 Stainless Steel.. Please be sure to specify your needs when placing an order and remember that we routinely produce custom luers and hubs in numerous alloys. Actual appearance may differ from photographs. Luers and hubs must be drilled to size to accept cannula, please advise your sales rep of the required diameter when ordering.

VN401	Hub 1/8 NPT Ext. Thread (fits .012-.220 cannula)	VN411	1510 Luer Lock Hub (fits .012-.125 cannula)
VN402	Hub 1/4 NPT Ext. Thread (fits .012-.220 cannula)	VN412	1520 Luer Lock Hub (fits .020-.125 cannula)
VN403	1170 Luer Lock Hub (fits .008 - .220 cannula)	VN413	1530 1/4 -32 Ext. Threaded Hub (fits .032-.072 cannula)
VN404	1170T 10-32 Int. Threaded Luer Lock Hub (fits .008 - .065 cannula)	VN414	1535 Ext. Threaded Luer Lock Hub (fits .028-.065 cannula)
VN405	1180P 12-32 Int. Threaded Oiling Hub (fits .020-.083 cannula)	VN415	RT18HX Hex Hub with 1/4 -28 Ext. Thread (fits .025-.134 cannula)
VN406	1280E 1/4 -28 Int. Threaded Oiling Hub (fits .020-.083 cannula)	VN416	Alemite® Grease Fitting Style Hub (fits .028-.095 cannula)
VN407	1300 Luer Lock Hub (fits .008-.072 cannula)	VN417	Aluminum Luer Lock Hub (fits .032-.065 cannula)
VN408	1375 Luer Slip Hub (fits .012-.095 cannula)	VN418	Minimum Dead Volume Short Luer Lock Hub (fits .008-.220 cannula)
VN410	1400T 5/32 -40 Int. Threaded Luer Lock Hub (fits .012-.072 cannula)	VN419	5/16 -32 Ext. and 12-32 Int. Threaded Hub (fits .052-.125 cannula)

Adapters:

Our stock adapters are Brass and Chrome Plated unless a part number is listed in blue for 303 Stainless Steel or red for 316 Stainless Steel. Please be sure to specify your needs when placing an order and remember that we routinely produce custom adapters in numerous alloys / metals. Actual appearance may differ from photographs.

Male Luer Lock to XXX Female Luer Lock to XXX

VN503		MLL TO SMALL 1 BARB (.150 Barb Diameter ref)
VN504		MLL TO MEDIUM 1 BARB (.225 Barb Diameter ref)
VN505 VN521 VN529		MLL TO LARGE 3 BARB (.310 Barb Diameter ref)
VN509		MLL TO MLL
VN517 VN525		MLL TO MLL
VN511		MLL TO 10-32M THREAD
VN512		MLL TO 1/4 NPT M (#V2)
VN513		MLL TO 1/8 NPT M (#V1)
VN515 VN523 VN531		MLL TO BLANK
VN519 VN527		MLL TO 1/4 -28 M THREAD
VN533		MLL TO 5/16 -28 M THREAD
VN534		MLL TO 1/4 -28 M THREAD
VN535		MLL TO 12-32 M THREAD
VN536		MLL TO 5/16 -32 M THREAD
VN537		MLL TO 10-40 M THREAD
VN538		MLL TO 10-32 F THREAD
VN539		MLL TO FLL
VN554 VN559		SMALL 3 BARB WITH 1/4-32 THREAD PLUS NUT & WASHER [Bulkhead Fitting] TO MLL (.150 Barb Diameter ref)
VN650		MLL TO MLL STOPCOCK

VN506		FLL TO SMALL 1 BARB (.150 Barb Diameter ref)
VN507		FLL TO MEDIUM 1 BARB (.225 Barb Diamter ref)
VN508 VN522 VN530		FLL TO LARGE 3 BARB (.310 Barb Diameter ref)
VN510		FLL TO FLL
VN518 VN526		FLL TO FLL
VN514		FLL TO 10-32 M THREAD
VN516		FLL TO BLANK (1170 RN)
VN524 VN532		FLL TO BLANK
VN520 VN528		FLL TO 1/4 -28 M THREAD
VN540		FLL TO 1/4 -28 M THREAD
VN541		FLL TO 12-32 M THREAD
VN550 VN555		SMALL 3 BARB WITH 1/4-32 THREAD PLUS NUT & WASHER [Bulkhead Fitting] TO FLL (.150 Barb Diameter ref)
VN551 VN556		FLL TO SMALL 3 BARB (.150 Barb Diameter ref)
VN552 VN557		FLL TO M6-1 THREAD WITH HEX
VN553 VN558		1/4-32 EXT THREAD TO FLL WITH STOPCOCK

See our custom RFQ page to request a quote on a custom Luer, Hub or Adapter. Our sales engineers will gladly work with you to produce the part you need!

Thread to XXX

VN542	12-32 M THREAD TO 1/8 NPT M THREAD (MP 10)	VN547	12-32 M THREAD TO LARGE 3 BARB
VN543	12-32 M THREAD TO 1/8 NPT F THREAD (FP 30)	VN548	12-32 M THREAD TO MEDIUM 1 BARB
VN544	1/4-28 M THREAD TO 12-32 F THREAD (PE-50)	VN549	12-32 M THREAD TO SMALL 1 BARB
VN545	1/8 NPT F TO 12-32 F THREAD	VN501	1/4-28 M THREAD TO 1/8 NPT M (ME 20)
VN546	1/8 NPT F TO BLANK	VN502	1/4-28 M THREAD TO 1/8 NPT F (FE40)

BACK TO NEEDLES, LUERS & ADAPTERS

Contact Us | Home | Terms of Use & Privacy
© 2004 Vita Needle Company, Inc. • 919 Great Plain Avenue • Needham, MA 02492
Phone: 781-444-1780 • Fax 781-444-3956 • Email: sales@vitaneedle.com